Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing a JCS1200 Bezel

    Figure 1 shows how to install a bezel.

    Figure 1: Installing a JCS1200 Bezel

    Installing a JCS1200 Bezel

    To install a bezel (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Holding the sides of the bezel, orient the bezel so the logo is at the top and right corner.
    3. Place the bottom edge of the bezel on the bezel retention tab.
    4. Rotate the top of the bezel toward the JCS1200 platform until the bezel clicks into place.
    5. Turn the quarter-turn bezel locks to the locked position.

    Published: 2013-01-30