Installing an MX960 AS MXC
To install an AS MXC (see Figure 1):
- Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
- Align the notches in the connector at the rear of the
AS MXC with the notches in the AS MXC slot (slot 1—the bottom
slot in the AS MLC), and then slide the AS MXC in until it lodges
firmly in the AS MLC.
Slide the AS MXC straight into the slot to avoid damaging the components on the bottom of the AS MXC.
- Use one of the following methods to bring the AS MXC online:
Press the AS MXC offline/online button until the LED light turns green.
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the CLI Explorer.
The normal functioning status LED confirms that the AS MXC is online. You can also verify correct AS MXC functioning by issuing the
show chassis fpc pic-statuscommand.