Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing a JCS1200 Alarm Panel Module or Module Filler

    Figure 1 shows how to remove and install an alarm panel module.

    Figure 1: Removing and Installing a JCS1200 Alarm Panel Module

    Removing and Installing
a JCS1200 Alarm Panel Module

    To remove an alarm panel module or module filler (see Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Pull the release handle to the open position. The module moves out of the bay approximately 0.25 in. (0.6 cm).
    3. Slide the alarm panel module out of the bay.

    Published: 2013-01-30