Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Upgrading the TX Matrix Plus Left Front Air Filter Cover

    1. Removing the TX Matrix Plus Left Front Air Filter Cover
    2. Installing the TX Matrix Plus Left Front Air Filter Cover

    Removing the TX Matrix Plus Left Front Air Filter Cover

    The left front air filter cover is located to the left edge of the chassis , and weighs less than 1 lb (0.5 kg). To remove the left front air filter cover (see Figure Figure 1):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Loosen the captive screws at the top, center, and bottom of the air filter cover, using a Phillips (+) screwdriver, number 2.
    3. Grasp the air filter cover by the captive screws and pull firmly to remove the cover from the chassis .

    Figure 1: Removing a Left Front Air Filter Cover

    Removing
a Left Front Air Filter Cover

    Installing the TX Matrix Plus Left Front Air Filter Cover

    To install the upgraded left front air filter cover (see Figure Figure 2):

    1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
    2. Install the air filter cover. Using a Phillips (+) screwdriver, number 2, firmly tighten the captive screws at the top, center, and bottom of the air filter cover to secure it to the chassis, .

    Figure 2: Installing the Left Front Air Filter Cover

    Installing
the Left Front Air Filter Cover

    Published: 2013-08-16