Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the Side Plenums

    You can install the right and left plenums of the air deflector kit by following this procedure.

    1. Slide the right plenum from the top such that it fits into the void along the side of the services gateway, resting on the top plenum as shown in Figure 1.

      Note: If there are no obstructions surrounding the services gateway mounted on the rack, then the side plenums are mounted horizontally from the sides (without having to install them from top), implying, that you do not require 18.15 RU of rack space as mentioned in Unresolved xref.

      Position the top plenum over the services gateway such that the model number displayed on it matches the services gateway installed.

    2. Secure the right plenum to the bottom plenum (at the front and rear), with captive screws provided.

      Note: The two captive screws on top (to the right and left) of the side plenums are not used.

    3. Slide the left plenum from the top such that it fits into the void along the side of the services gateway, resting on the top plenum as shown in Figure 1.
    4. Secure the left plenum to the bottom plenum (at the front and rear), with captive screws provided.

      Note: The two captive screws on top (to the right and left) of the side plenums are not used.

      Figure 1: Installing the Side Plenums

      Installing the Side Plenums
    5. Secure the right and left plenums to the top plenum with flat-head screws provided as shown in the Figure 2.

      Figure 2: Securing the Right and Left Plenums

      Securing the Right and Left Plenums
    6. Install the perforated screens in front of the bottom and top plenums as shown in Figure 3.

      Figure 3: Installing the Perforated Screens

      Installing the Perforated Screens
    7. Secure the perforated screens to the plenums with screws as shown in Figure 3.

    You have successfully installed the right and left plenums, and the perforated screens of the air deflector kit. Figure 4 shows the completed installation of the air deflector kit with the services gateway.

    Figure 4: Completed Air Deflector Kit Installation

    Completed Air Deflector Kit
Installation

    Published: 2015-04-02