ACX710 Installation Overview
You can mount ACX710 routers in one of two ways:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets provided with the router for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket provided in the standard mounting kit for this configuration. Recessed mounting is primarily used in enclosed cabinets.
To install and connect an ACX710 router:
- Follow the instructions in Unpack and Mount an ACX710 Router.
- Determine how the device is to be mounted.
For instructions on flush or recessed mounting, see Mount an ACX710 Router in a Rack.
Follow the instructions in:
- Follow the instructions in Perform Initial Software Configuration for the ACX710 Routers.