Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the AX411 Access Point Mounting Bracket on a Wall

    To install the access point mounting bracket on a wall:

    1. Obtain the optional mounting bracket from your Juniper Networks reseller. The mounting bracket is not supplied with the access point.
    2. Locate the place on the wall where you intended to mount the access point.
    3. Use the mounting bracket as a template to mark the locations for two screws that secure the mounting bracket to the wall. If practical, use screw holes on opposite sides or edges of the mounting bracket.
    4. If necessary, install anchors for the screws to distribute the weight of the access point into the wall.
    5. Attach the mounting bracket to the wall using screws appropriate to the wall and anchoring system.

      Figure 1: Attaching the Mounting Bracket to a Wall

      Image g033106.gif

    Published: 2011-07-29