Configuring Specific LCC Chassis Features for the T640 Router
You can configure PIC-specific features, such as SONET/SDH framing, for specific T640 routers within the routing matrix. See Routing Matrix with a TX Matrix Router Deployment Guide.
The following is a list of PIC-specific configuration statements that must be configured for specific T640 routers within the routing matrix:
atm-cell-relay-accumulation
atm-l2circuit-mode
See atm-l2circuit-mode.
framing
See framing.
idle-cell-format
See idle-cell-format.
max-queues-per-interface
no-concatenate
See no-concatenate.
To configure chassis-specific features, include the lcc lcc-number statement at the [edit chassis] hierarchy level, and specify the chassis-specific feature to configure.
When you include statements at the [edit chassis lcc lcc-number] hierarchy level, specify the actual FPC hardware slot number as labeled on the T640 router. Do not use the routing matrix-based FPC number shown in FPC Slot Number Correspondence.