Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Starting a J-Web Interface Session

    You can use the J-Web interface to configure and manage the QFX Series.

    To start a J-Web interface session:

    1. Launch your HTTP-enabled or HTTPS-enabled Web browser.

      To use HTTPS, you need to have an SSL certificate installed on the switch, and HTTPS enabled.

    2. After http:// or https:// in your Web browser, type the hostname or IP address of the switch and press Enter.

      The J-Web interface login page appears.

    3. On the login page, type your username and password, and click Log In.

      To correct or change the username or password you typed, click Reset, type the new entry or entries, and click Log In.

      Note: The default username is root with no password. You must change this during the initial configuration, or the system does not accept the configuration.

      The Chassis Dashboard information page appears.

    To explicitly terminate a J-Web interface session at any time, click Logout in the top pane.

    Published: 2013-08-15