Technical Documentation

Basic Configuration of the T1/E1 Mini-Physical Interface Module

To enable the T1/E1 Mini-Physical Interface Module (Mini-PIM) installed on the SRX Series Services Gateway to work properly, you must configure a T1 or an E1 interface.

You can configure a T1 and E1 interface using:

  • J-Web configuration editor
  • CLI configuration editor

For more information about configuring the Mini-PIMs, see the following guides:

  • JUNOS Software Interfaces and Routing Configuration Guide
  • JUNOS Software CLI Reference Guide

Published: 2010-07-13

My Account
Log Out