[an error occurred while processing this directive] [an error occurred while processing this directive]

Configuring Management Access for the EX-series Switch

You can set up secure access to the J-Web interface.

Navigate to the Secure Access Configuration page by selecting Configure>System Properties>Management Access. On this page, you can enable HTTP and HTTPS access on interfaces for managing the EX-series switch through the J-Web interface. You can also install SSL certificates and enable JUNOScript over SSL with the Secure Access page.

  1. Enter information into the Management Access Configuration page, as described in Table 1.
  2. Click one:
    • To apply the configuration, click OK.
    • To cancel your entries and return to the System Properties page, click Cancel.
  3. To verify that Web access is enabled correctly, connect to the switch using the appropriate method:
    • For HTTP access—In your Web browser, type http://URL or http://IP address.
    • For HTTPS access—In your Web browser, type https://URL or https://IP address.
    • For SSL JUNOScript access— To use this option, you must have aJUNOScript client such as JUNOScope. For information about how to log into JUNOScope, see the JUNOScope Software User Guide.

Table 1: Secure Access Configuration Summary

Field

Function

Your Action

Management Access tab

Management Port IP

Specifies the management port IP address

Type a 32-bit IP address, in dotted decimal notation.

Default Gateway

Defines a default gateway through which to direct packets addressed to networks that are not explicitly listed in the bridge table constructed by the switch.

Type a 32-bit IP address, in dotted decimal notation.

Services

Specifies services to be enabled: telnet and SSH.

Select to enable the required services.

Enable JUNOScript over Clear Text

Enables clear text access to the JUNOScript XML scripting API.

To enable clear text access, select the Enable JUNOScript over Clear Text check box.

Enable JUNOScript over SSL

Enables secure SSL access to the JUNOScript XML scripting API.

To enable SSL access, select the Enable JUNOScript over SSL check box.

JUNOScript Certificate

Specifies SSL certificates to be used for encryption.

This field is available only after you create at least one SSL certificate.

To enable an SSL certificate, select a certificate from the JUNOScript SSL Certificate list—for example, new.

HTTP Web Access

Enable HTTP Access

Enables HTTP access on interfaces.

To enable HTTP access, select the Enable HTTP access check box.

Select and clear interfaces by clicking the direction arrows:

  • To enable HTTP access on an interface, add the interface to the HTTP Interfaces list. You can either select all interfaces of specific interfaces.
  • To disable HTTP access on an interface, add the interface to the Logical Interfaces list.
HTTPS Web Access

Enable HTTPS Access

Enables HTTPS access on interfaces.

To enable HTTPS access, select the Enable HTTPS access check box.

Select and deselect interfaces by clicking the direction arrows:

  • To enable HTTPS access on an interface, add the interface to the HTTPS Interfaces list. You can either select all interfaces of specific interfaces.

    Note: Specify the certificate to be used for HTTPS access.

  • To disable HTTPS access on an interface, add the interface to the Logical Interfaces list.
Certificates tab

Certificates

Displays digital certificates required for SSL access to the switch.

Allows you to add and delete SSL certificates.

To add a certificate:

  1. Have a general SSL certificate available. See Generating SSL Certificates for more information.
  2. Click Add. The Add a Local Certificate page opens.
  3. Type a name in the Certificate Name box—for example, new.
  4. Paste the generated certificate and RSA private key in the Certificate box.

To edit a certificate, select it and click Edit.

To delete a certificate, select it and click Delete.

Related Topics

  • Understanding J-Web User Interface Sessions
[an error occurred while processing this directive]