EX-series Switch—XFP Uplink Module Port LEDs
The ports on the 10-gigabit small-form factor pluggable transceiver (XFP) uplink module have two LEDs. Figure 1 shows the XFP uplink module port and the location of the LEDs on the port.
The LEDs labeled LED 1 in Figure 1 indicate link status, and the LEDs labeled LED 2 in Figure 1 indicate the status of one of the four port parameters. The port parameters are: administrative status; duplex mode; PoE status; and speed.
Figure 1: EX-series Switch—XFP Uplink Module Port LEDs
Table 1 describes LED 1.
Table 1: EX-series Switch—XFP Uplink Module Port LEDs–LED 1
|
LED |
Color |
State and Description |
|---|---|---|
|
LED 1 |
Unlit |
No link activity. |
|
Green |
|
Table 2 describes LED 2, which indicates the administrative status (enabled or disabled), duplex mode, PoE status, or speed, of the XFP uplink module ports. From the Idle menu of the LCD, use the Enter button on the LCD panel to toggle between the ADM, DPX, POE, and SPD indicators.
Table 2: EX-series Switch—XFP Uplink Module Port LEDs–LED 2
