Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Verifying the State of the Routing Matrix Control Plane



After the LCC has booted, verify the state of the routing matrix control plane.


To verify that the routing matrix control plane is operating correctly:

  1. Issue the show chassis ethernet-switch sfc 0 command.

    Verify that the link to the LCC (LCClcc-number) is good. For example, Link is good on GE port 2 connected to device: LCC1.


    The throughput of the control plane connections between the TX Matrix Plus router and the LCC is 1 Gbps. The throughput of the connections between the Routing Engines in a TX Matrix Plus router is 10 Gbps.

    user@host> show chassis ethernet-switch sfc 0