Troubleshooting SPCs on the SRX3600 Services Gateway
To troubleshoot an SPC, follow these guidelines:
Make sure the SPC is properly seated in the midplane and its screws are tightened.
Issue the CLI show chassis fpc command to check the status of installed SPCs. As shown in the sample output, the value Online in the column labeled State indicates that an SPC in slot 2 is functioning normally:
user@host> show chassis fpcTemp CPU Utilization (%) Memory Utilization (%) Slot State (C) Total Interrupt DRAM (MB) Heap Buffer 1 Empty 41 9 0 1024 15 57 2 Online 43 5 0 1024 16 57 3 Online 43 11 0 1024 16 57 4 Empty 5 Empty 6 Online 42 6 0 1024 16 57
For more detailed output, add the detail option. The following example does not specify a slot number, which is optional:
user@host> show chassis fpc detail
Slot 2 information: State Online Temperature 43 degrees C / 109 degrees F Total CPU DRAM 1024 MB Total RLDRAM 256 MB Total DDR DRAM 4096 MB Start time: 2007-07-10 12:28:38 PDT Uptime: 1 hour, 33 minutes, 47 seconds Slot 3 information: State Online Temperature 43 degrees C / 109 degrees F Total CPU DRAM 1024 MB Total RLDRAM 256 MB Total DDR DRAM 4096 MB Start time: 2007-07-10 12:28:40 PDT Uptime: 1 hour, 33 minutes, 45 seconds Slot 6 information: State Online Temperature 42 degrees C / 107 degrees F Total CPU DRAM 1024 MB Total RLDRAM 256 MB Total DDR DRAM 4096 MB Start time: 2007-07-10 12:28:42 PDT Uptime: 1 hour, 33 minutes, 43 secondsFor further description of the output from the commands, see the Junos System Basics and Services Command Reference.
Related Documentation
Troubleshooting with Chassis and Interface Alarm Messages on the SRX3600 Services Gateway
Troubleshooting with the CLI on the SRX3600 Services Gateway
Troubleshooting the Cooling System on the SRX3600 Services Gateway
Troubleshooting IOCs and NP-IOCs on the SRX3600 Services Gateway
Troubleshooting the Power System on the SRX3600 Services Gateway