RJ-45 Connector Pinouts for an MX Series Routing Engine ETHERNET Port
The port on the Routing Engine labeled ETHERNET
is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts
an Ethernet cable for connecting the Routing Engine to a management
LAN (or other device that supports out-of-band management). Table 1 describes the RJ-45 connector
pinout.
Table 1: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port
Pin | Signal |
---|---|
1 | TX+ |
2 | TX– |
3 | RX+ |
4 | Termination network |
5 | Termination network |
6 | RX– |
7 | Termination network |
8 | Termination network |