Pinouts for JCS1200 RJ-45 Adapters
If needed, you can use the RJ-45 AMM adapter to connect a console to the management module. Pinouts for the AMM adapter are shown in Table 1.
Table 1: Pinouts for the AMM Adapter
RJ-45 Female | Input/Output signal | RJ-45 Male |
|---|---|---|
1 | RTS | 1 |
2 | DTR | 3 |
3 | TX | 6 |
4 | GND | 4 |
5 | GND | 2 (DCD) |
6 | RX | 5 |
7 | DSR | 1 |
8 | CTS | 7 |
To connect a console to the JCS1200 Routing Engines, you can connect a breakout serial cable to the external serial port on the alarm panel module. If needed, you can use the RJ-45 CPU adapters to connect each of the 12 RJ-45 connectors to the console. Pinouts for the CPU adapter match the breakout cable and are shown in Table 2.
Table 2: Pinouts for the CPU Adapter and Breakout Serial Cable
RJ-45 Female | Input/Output signal | RJ-45 Male |
|---|---|---|
1 | RTS | 1 |
2 | – | – |
3 | RX | 6 |
4 | GND | 4 |
5 | – | – |
6 | TX | 3 |
7 | – | – |
8 | CTS | 8 |
