Management Port Connector Pinout Information for an XRE200 External Routing Engine
The management port (labeled MGMT) on an XRE200 External Routing Engine uses an RJ-45 connector to connect to a management device for out-of-band management.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T connection.
Table 1 provides the pinout information of the RJ-45 connector. An RJ-45 cable, with a connector attached, is supplied with the XRE200 External Routing Engine.
Table 1: Management Port Connector Pinout Information for an XRE200 External Routing Engine
Pin | Signal | Description |
|---|---|---|
1 | TRP1+ | Transmit/receive data pair 1 |
2 | TRP1- | Transmit/receive data pair 1 |
3 | TRP2+ | Transmit/receive data pair 2 |
4 | TRP3+ | Transmit/receive data pair 3 |
5 | TRP3- | Transmit/receive data pair 3 |
6 | TRP2- | Transmit/receive data pair 2 |
7 | TRP4+ | Transmit/receive data pair 4 |
8 | TRP4- | Transmit/receive data pair 4 |
