Management Port LEDs on EX4300 Switches

 

The management port, labeled MGMT, on the rear panel of an EX4300 switch, has two LEDs that indicate link activity and status of the management port. Figure 1 shows the location of Management port on a 24-port EX4300 switch. The location of the LEDs and their behavior are similar for all EX4300 switches except EX4300-48MP and EX4300-48MP-S switches. Figure 2 shows the location of Management port on EX4300-48MP and EX4300-48MP-S Switches.

Figure 1: LEDs on the Management Port on a 24-Port EX4300 Switch
LEDs on the Management Port
on a 24-Port EX4300 Switch
  1
Link/Activity LED
  2
Status LED
Figure 2: LEDs on the Management Port on EX4300-48MP and EX4300-48MP-S Switches
LEDs on the Management
Port on EX4300-48MP and EX4300-48MP-S Switches
  1
Link/Activity LED
  2
Status LED

Table 1 describes the Link/Activity LED.

Table 1: Link/Activity LED on the Management Port on an EX4300 Switch

LED

Color

State and Description

Link/Activity

Green

  • Blinking—The port and the link are active, and there is link activity.

  • On steadily—The port and the link are active, but there is no link activity.

  • Off—The port is not active.



Table 2 describes the Status LED.

Table 2: Status LED on the Management Port on an EX4300 Switch

LED

Color

State and Description

Status

Green

Indicates the speed. The speed indicators are:

  • EX4300 switches except EX4300-48MP and EX4300-48MP-S switches:

    • Off—Link speed is 10 Mbps.

    • Blinking—Link speed is 100 Mbps.

    • On steadily—Link speed is 1000 Mbps.

  • EX4300-48MP and EX4300-48MP-S switches:

    • Off—Link speed is 10 Mbps or 1000 Mbps.

    • On steadily—Link speed is 100 Mbps.