Console Port Connector Pinout Information
The console port on a Juniper Networks device is an RS-232 serial interface that uses an RJ-45 connector to connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 1 provides the pinout information for the RJ-45 console connector.
If your laptop or PC does not have a DB-9 male connector pin and you want to connect your laptop or PC directly to a device, use a combination of the RJ-45 to DB-9 female adapter and a USB to DB-9 male adapter. You must provide the USB to DB-9 male adapter.
Table 1: Console Port Connector Pinout Information
Pin | Signal | Description |
|---|---|---|
1 | RTS Output | Request to send |
2 | DTR Output | Data terminal ready |
3 | TxD Output | Transmit data |
4 | Signal Ground | Signal ground |
5 | Signal Ground | Signal ground |
6 | RxD Input | Receive data |
7 | CD Input | Data carrier detect |
8 | NC | CTS Input |