Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

M7i Router AC Power, Connection, and Power Cord Specifications

 

Detachable AC power cords, each 2.5 m (approximately 8 ft) long, are supplied with the router. The C13 appliance coupler at the female end of the cord inserts into the AC appliance inlet coupler, type C14 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source receptacle that is standard for your geographical location.

Warning

The AC power cord for the router is intended for use with the router only and not for any other use.

Warning

Translation from Japanese: The attached power cable is only for this product. Do not use the cable for another product.

Note

In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the router are in compliance.

Table 1 provides specifications and Figure 1 depicts the plug on the AC power cord provided for each country or region.

Table 1: AC Power Cord Specifications

Country

Electrical Specification

Plug Type

Australia

240 VAC, 50 Hz AC

SAA/3

Europe (except Italy and United Kingdom)

220 or 230 VAC, 50 Hz AC

CEE 7/7

Italy

230 VAC, 50 Hz AC

CEI 23-16

North America

120 VAC, 60 Hz AC

NEMA 5-15P

United Kingdom

240 VAC, 50 Hz AC

BS89/13

Figure 1: AC Plug Types
AC Plug Types
Note

Power cords and cables must not block access to router components or drape where people could trip on them.