[an error occurred while processing this directive] [an error occurred while processing this directive]

Line Card LEDs in an EX 8200 series Switch

The line cards in EX 8200 series switches have two status LEDs labeled ON and ST on the faceplate (see Figure 1, Figure 2, and Figure 3) that indicate the online and status information of the line cards.

Figure 1: Status LEDs on 48-port RJ-45 Line Card

Image g020541.gif

Figure 2: Status LEDs on 48-port SFP Line Card

Image g020542.gif

Figure 3: Status LEDs on 8-port SFP+ Line Card

Image g020543.gif

Table 1 describes the status LEDs on line cards for the EX 8200 series switch, their colors and state, and the status they indicate.

Table 1: Status LEDs on Line Cards for EX 8200 series Switches

LED

Color

State and Description

ON

Green

The line card is enabled/online.

Yellow

The line card is disabled/offline.

Unlit

There is no power being supplied to the line card.

ST

Green

  • On steadily—The line card is functioning normally.
  • Blinking—The line card is booting.

Yellow

  • On steadily—There is a line card failure or alarm.
  • Blinking—The line card is in diagnostic mode.

Unlit

The line card is disabled/offline.


Updated: 2009-04-09

[an error occurred while processing this directive]