Technical Documentation

SRX650 Services Gateway Dual T1/E1 GPIM Specifications

The Dual T1/E1 GPIM has the specifications described in Table 1.

Table 1: Dual T1/E1 GPIM Specifications

Description

Value

Dimensions (H x W x L)

0.78" H x 6.72" W x 8.1" L

(19.8 mm x 170.8 mm x 205.7 mm)

Weight

15.4 oz (0.44 kg)

Connector type

RJ-45

Form factor

Single-high, single-wide GPIM

Environmental operating temperature

32°F through 104°F (0°C through 40°C)

Storage temperature

-40°F through 158°F (-40°C through 70°C)

Relative humidity

5% to 90% noncondensing

The Dual T1/E1 GPIM contains the LED described in Table 2.

Table 2: Dual T1/E1 GPIM LED States

LED

Color Indication

Status

Description

STATUS

Green

On steadily

The GPIM is online and functioning normally.

Amber

On steadily

The GPIM is starting up, running diagnostics, or shutting down.

Red

On steadily

The GPIM has failed.

The Dual T1/E1 GPIM contains the components described in Table 3.

Table 3: Dual T1/E1 GPIM Components

Component

Location

Description

GPIM Online/Offline button

Right side of the GPIM

Use the GPIM Online/Offline button to gracefully shut down the GPIM.

Note: This feature is currently not supported for this release. To remove any GPIM, you must first power off the services gateway.

2 fixed T1/E1 ports labeled 0 to 1

Each port can be configured using CLI in T1 or E1 mode.

Middle of the GPIM

Each port:

  • Provides link speeds of 10/100/1000 Mbps.
  • Uses an RJ-45 connector.
  • Operates in full-duplex and half-duplex modes.
  • Supports flow control.
  • Supports autonegotiation.

Captive screws

One on each side of the GPIM

Use the captive screws to hold the GPIM in place in the services gateway.


Updated: 2009-04-23