8-Port Gigabit Ethernet SFP XPIM Components
The 8-Port Gigabit Ethernet small form-factor pluggable Gigabit-Backplane Physical Interface Module (SFP XPIM) contains the components listed in Table 1.
Table 1: 8-Port Gigabit Ethernet SFP XPIM Components
Right side of the XPIM
Use the ONLINE/OFFLINE button to gracefully shut down the XPIM. Press down and hold the button for 4 to 5 seconds; then release. The XPIM gracefully shuts down and turns off the power supply units (PSUs).
To power up the XPIM (if the Services and Routing Engine [SRE] is off), press and hold the ONLINE/OFFLINE button for 4 to 5 seconds.
TX and RX coaxial connectors
Middle/right of the XPIM
Dual 75-ohm BNC coaxial socket connectors: TX (transmit) and RX (receive).
Two captive screws
One on each side of the XPIM
Use the captive screws to hold the XPIM in place.