Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Field-Replaceable Units for QFX3600 and QFX3600-I Devices

 

Field-replaceable units (FRUs) are components that you can replace at your site. QFX3600 and QFX3600-I device FRUs are hot-insertable and hot-removable: you can remove and replace them without powering off the device or disrupting the switching function.

Caution

Replace a failed power supply with a blank panel or new power supply within 1 minute of removal to prevent chassis overheating. Replace a failed fan tray with a new fan tray within 1 minute of removal to prevent chassis overheating.

Table 1 lists the FRUs for QFX3600 and QFX3600-I devices and actions to take before removing them.

Table 1: Field-Replaceable Units for QFX3600 and QFX3600-I Devices

FRU

Required Action

Power supplies

None.

Fan trays

None.

Optical transceivers

None. We recommend that you disable the interface using the set interfaces interface-name disable command before you remove the transceiver. See Disconnecting a Fiber-Optic Cable from a QFX Series Device.

Note

If you have a Juniper J-Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp . Failure to do so can result in significant delays if you need replacement parts. This note does not apply if you replace existing components with the same type of component.