EX-series Switch—Network Port LEDs

Download PDFs
EX-series Switch—Network Port LEDs

EX-series Switch—Network Port LEDs

Each network port (RJ-45 connectors) on the front panel of an EX-series switch has two LEDs. Figure 1 shows the network ports and the locations of the LEDs on the port.

Figure 1: EX–series Switch—Network Port LEDs

Image g020106.gif

The LEDs labeled LED 1 in Table 1 indicate whether the ports are in full-duplex or half-duplex mode, and the link speed. LEDs labeled LED 2 indicate link activity and whether PoE is enabled on the ports. Table 1 describes these LEDs, their colors and state, and the status they indicate.

Table 1: EX-series Switch—Network Port LEDs

LED	Color	State and Description
LED 1	Unlit	No link activity; PoE is not enabled.
	Green	On steadily—The port is up and the link is active, but there is no link activity. Blinking—The port is up, with active links.
	Yellow	On steadily—PoE is enabled.
LED 2	Green	Indicates that port is operating in full-duplex mode. The link-speed indicators are: One blink per second—10 Mbps Two blinks per second—100 Mbps Three blinks per second—1000 Mbps
LED 2	Yellow	Indicates that port is operating in half-duplex mode. The link-speed indicators are: One blink per second—10 Mbps Two blinks per second—100 Mbps Three blinks per second—1000 Mbps

EX-series Switch—Network Port LEDs

Related Topics