Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Chassis Status LEDs in the QFX3600 and QFX3600-I Device

 

The front panel of the QFX3600 and QFX3600-I device has three LEDs on the right side of the management board, next to the LCD panel (see Figure 1).

Figure 1: Chassis Status LEDs in the QFX3600 and QFX3600-I Device
Chassis Status
LEDs in the QFX3600 and QFX3600-I Device

Table 1 describes the chassis status LEDs in a QFX3600 and QFX3600-I device, their colors and states, and the status they indicate. You can view the colors of the three LEDs remotely through the CLI by issuing the operational mode command show chassis lcd.

Table 1: Chassis Status LEDs in the QFX3600 and QFX3600-I Device

Name

Color

State

Description

Power

Green

On steadily

The device is powered on.

Amber

Blinking

A temperature or voltage error has been detected, and the device has shut down. Power off the QFX3600 or QFX3600-I device following the instructions in Powering Off a QFX3600 Device. Correct any site temperature issues, and allow the device to cool down. Power on the QFX3600 or QFX3600-I device and monitor the power supply and fan LEDs to help determine where the error is occurring. If the amber Power LED begins blinking again, power off the QFX3600 or QFX3600-I device and contact customer support. See Contacting Customer Support to Obtain a Return Materials Authorization for a QFX Series Device or Component.

Status

Green

On steadily

Junos OS has been loaded on the device.

Intermittent blinking

The beacon feature has been enabled on the device using the request chassis beacon command.

 

Amber

Blinking

A software error has occurred. Power off the QFX3600 or QFX3600-I device by following the instructions in Powering Off a QFX3600 Device. Power on the QFX3600 or QFX3600-I device and monitor the management board LEDs to ensure that Junos OS boots properly.

Fan

Green

On steadily

The fan trays are operating normally.

Amber

Blinking

An error has been detected in a fan tray installed on the rear panel of the device. Replace the fan tray as soon as possible. To maintain proper airflow through the chassis leave the fan tray installed in the chassis, until you are ready to replace it.