NFX150 Chassis

Front Panel of an NFX150 Device

Figure 1 shows the front panel components of an NFX150-C-S1 device.

Figure 2 shows the front panel components of NFX150-C-S1-AA and NFX150-C-S1-AE devices.

Figure 3 shows the front panel components of an NFX150-S1 device.

Rear Panel of an NFX150 Device

Figure 4 shows the rear panel of the NFX150-C-S1 device. The rear panel of the NFX150-C-S1 device consists of the following components:

Figure 5 shows the rear panel of the NFX150-S1 device. The rear panel of the NFX150-S1 device consists of the following components:

LED Details of an NFX150 Device

Chassis Status LEDs

The front panel of an NFX150-C-S1 and NFX150-S1 devices have chassis status LEDs labeled ALM, SYS, MST and PH.

Figure 6 shows the chassis status LEDs in an NFX150-C-S1 device.

Figure 7 shows the chassis status LEDs in an NFX150-S1 device.

Table 1 describes the chassis status LEDs in an NFX150 device, their colors and states, and the status they indicate. You can view the colors of the four LEDs remotely through the CLI by issuing the operational mode command show chassis led.

Table 1: Chassis Status LEDs in an NFX150 Device

LED Label	Color	State and Description
ALM (Alarm)	Unlit	There is no alarm or the device is halted.
	Red	There is a major alarm.
	Amber	There is a minor alarm.
SYS (System)	Green	On steadily—Junos OS has been loaded on the device. Blinking—The device is booting. Off—The device is powered off or is halted.
MST (Master)	Green	On steadily—The device is functioning normally. Off—The device is powered off or is halted.
PH	Unlit	There is no Network Service Activator transaction.
	Green	On steadily—Network Service Activator transaction is successfully completed. That is, the Network Service Orchestrator in NFX150 contacted the Network Service Activator and provisioned the software image successfully. Blinking—Network Service Activator transaction is underway. Off—The device is powered off or is halted.
	Amber	On steadily—Network Service Activator transaction is terminated unsuccessfully. Blinking—Network Service Activator transaction is waiting for user input.

A major alarm (red) indicates a critical error condition that requires immediate action.

A minor alarm (amber) indicates a noncritical condition that requires monitoring or maintenance. A minor alarm left unchecked might cause interruption in service or performance degradation.

All four LEDs can be lit simultaneously.

Network Port and Uplink Port LEDs

Each network port and uplink port on the front panel of an NFX150 has two LEDs that indicate link activity and port status (see Figure 8).

Table 2 describes the Link/Activity LED.

Table 2: Link/Activity LED on the Network Ports and Uplink Ports in NFX150 Devices

LED	Color	State and Description
Link/Activity	Green	Blinking—The port and the link are active, and there is link activity. On steadily—The port and the link are active, but there is no link activity. Off—The port is not active.

Management Port LEDs

The management port on the front panel of an NFX150 device has two LEDs that indicate link activity and port status.

Table 3 describes the Link/Activity LED.

Table 3: Link/Activity LED on the Management Port of an NFX150 Device

LED	Color	State and Description
Link/Activity	Green	Blinking—The port and the link are active, and there is link activity. On steadily—The port and the link are active, but there is no link activity. Off—The port is not active.

Table 4 describes the status LED.

Table 4: Status LED on the Management Port of an NFX150 Device

LED	Color	State and Description
Status	Green	Indicates the speed. The speed indicators are: One blink per second—10 Mbps Two blinks per second—100 Mbps Three blinks per second—1000 Mbps

LTE Module LEDs

Table 5 lists the LEDs on the LTE module and their indications.

Table 5: LTE Module LED States

LED	Description
SIG (Received Signal Strength indicator)	Solid green (One bar) – Low signal strength. (<= -99dBm)
	Solid green (Two bars) – Low signal strength. (From -98dBm to -87dBm)
	Solid green (Three bars) – Low signal strength. (From -86dBm to -76dBm)
	Solid green (Four bars) – High signal strength. (>=-75dBm)
	Unlit – No signal
3G	Solid green – 3G connection is established.
3G	Blinking green – Connection to a 3G network.
LTE	Solid green – LTE connection is established.
LTE	Blinking green – Connection to a LTE network.
SIM1	Solid green – SIM1 is active.
SIM2	Solid green – SIM2 is active.

Note

If all the LEDs are blinking, it indicates that firmware updates are in progress. Do not power off the device before the updates complete.

1 — Mini-USB console port	5 — System status LEDs
2 — RJ-45 console port	6 — Two 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ WAN ports
3 — One 10/100/ 1000BASE-T RJ-45 management port	7 — USB 3.0 port
4 — Four 10/100/ 1000BASE-T RJ-45 LAN ports	8 — Reset button

1 — Antenna slot	7 — SIM card cover
2 — Mini USB console port	8 — LTE modem LEDs
3 — RJ-45 console port	9 — Two 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ WAN ports
4 — One 10/100/1000BASE-T RJ-45 management port	10 — USB 3.0 port
5 — Four 10/100/1000BASE-T RJ-45 LAN ports	11 — Reset button
6 — System status LEDs

1 — Mini USB console Port	6 — Expansion module slots
2 — RJ-45 console port	7 — Two 1-Gigabit Ethernet/10-Gigabit Ethernet SFP+ WAN ports
3 — One 10/100/1000BASE-T RJ-45 management port	8 — USB 3.0 port
4 — Four 10/100/1000BASE-T RJ-45 LAN ports	9 — Reset button
5 — System status LEDs

1 — Grounding point	5 — CLEI code
2 — Lock	6 — Power supply input
3 — Serial number	7 — Cable tie holder
4 — Fans	8 — Electrostatic discharge (ESD) point

1 — AC power cord inlet	5 — Fans
2 — Power switch	6 — CLEI code
3 — Grounding point	7 — Electrostatic discharge (ESD) point
4 — Serial number

ON THIS PAGE