Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Port Panel of ACX710 Routers

 

The port panel of an ACX710 router has the following port configurations:

  • Twenty-four 10GbE or 1GbE ports (ports 0 through 23) that operate at 10-Gbps speed when you use small form-factor pluggable plus (SFP+) transceivers or at 1-Gbps speed when you use small form-factor pluggable (SFP) optics. Ports 0 through 15 also support 1000-Mbps speed when you use tri-rate SFP optics. Ports 16 through 23 support 100-Mbps and 1000-Mbps speeds when you use tri-rate SFP optics.

  • Four 100GbE ports (ports 0 through 3) that support quad small form-factor pluggable 28 (QSFP28) transceivers. You can channelize these ports into four 25-Gbps interfaces using breakout cables and channelization configuration. These ports also support 40-Gbps speed when you use quad small form-factor pluggable plus (QSFP+) optics. You can channelize these 40-Gbps ports into four 10-Gbps interfaces using breakout cables and channelization configuration.

Figure 1 shows the port panel on an ACX710 router.

Figure 1: ACX710 Router Port Panel
ACX710 Router Port Panel
  1
1GbE/10GbE ports (24 SFP or SFP+ ports)
  2
40GbE/100GbE ports (4 QSFP+ or QSFP28 ports)