Management Panel of ACX710 Routers

The management panel of ACX710 routers is located on the front of the router along with the interface ports. Figure 1 shows the management panel components on an ACX710 router.

Figure 1: Management Panel Components on ACX710 Routers

1 — TOD port (RJ-45)	5 — Console port (RJ-45)
2 — I/O port (RJ-45)	6 — LMT port (RJ-45)
3 — USB port	7 — BITS port (RJ-48C)
4 — LEDs

The management panel on an ACX710 router displays the router product number and consists of the following components:

• Status LEDs

• RJ-45 1PPS+TOD (ITU-T G.703 Amd1) port to connect to an external time-of-day (TOD) device. See Connect a Time-of-Day Device to the ACX710 Router.

• RJ-45 alarm port for three input and one output alarm contacts. See Connect an ACX710 Router to External Alarm Devices.

• USB port for image updates

• RJ-45 console (CON) port to connect the device to a management console or to a console server. See Connect an ACX710 Router to a Management Console.

• RJ-45 (LMT) port to connect the device to a network for out-of-band management. See Connect an ACX710 Router to a Network for Out-of-Band Management.

• RJ-48C (BITS) port for 2.048 MHz, E1/T1 (BITS) input/output. See Connect a T1 or an E1 External Clocking Device to the ACX710 Router.