Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


SRX550 Services Gateway Supported AC Power Cords


The AC power cord for the services gateway is intended for use with the services gateway only and not for any other use.


In North America, AC power cords must not exceed 4.5 m (approximately 14.75 ft) in length, to comply with National Electrical code (NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3).

Table 1 provides power cord specifications, and Figure 1 depicts the plug on the AC power cord provided for each country or region.

Table 1: AC Power Cord Specifications


Electrical Specification

Plug Standards


250 VAC, 10 A, 50 Hz

AS/NZ 3112-1993


250 VAC, 10 A, 50 Hz

GB2099.1 1996 and GB 1002 1996 (CH1-10P)

Europe (except Italy and United Kingdom)

250 VAC, 10 A, 50 Hz



250 VAC, 10 A, 50 Hz

CEI 23-16/VII


125 VAC, 12 A, 50 or 60 Hz

JIS 8303

North America

125 VAC, 10 A, 60 Hz

NEMA 5-15

United Kingdom

250 VAC, 10 A, 50 Hz

BS 1363A

Figure 1: AC Plug Types
AC Plug Types

Power cords and cables must not block access to services gateway components or drape where people might trip on them.