AC Power Cord Specifications for a QFX3100 Director Device

 

Detachable AC power cords are supplied with the QFX3100 Director device. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Caution

The supplied AC power cord for the switches is intended for use with the QFX3100 Director device only and not for any other use.

Note

In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the QFX3100 Director device are in compliance.

Table 1 lists AC power cord specifications provided for each country or region.

Table 1: AC Power Cord Specifications for a QFX3100 Director Device

Country or Region

Electrical Specifications

Plug Standards

Australia

250 VAC, 10 A, 50 Hz

AS/NZ 3112-1993

China

250 VAC, 10 A, 50 Hz

GB2099.1 1996 and GB1002 1996 (CH1-10P)

Europe (except Italy, Switzerland, and United Kingdom)

250 VAC, 10 A, 50 Hz

CEE (7) VII

Italy

250 VAC, 10 A, 50 Hz

CEI 23-16/VII

Japan

125 VAC, 12 A, 50 Hz or 60 Hz

JIS 8303

Korea

250 VAC, 10A, 50 Hz

CEE 7/4

North America

125 VAC, 13 A, 60 Hz

NEMA 5-15

Switzerland

250 VAC, 10A, 50 Hz

SEV 1011 SEV 6534/2

United Kingdom

250 VAC, 10 A, 50 Hz

BS 1363A

Figure 1 illustrates the plug on the power cord for some of the countries or regions listed in Table 1.

Figure 1: AC Plug Types
AC Plug Types