AC Power Cord Specifications for a QFX Series Device

 

Detachable AC power cords are shipped with the chassis, if you include them as part of your order. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.

Note

In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX Series switches are in compliance.

Table 1 lists AC power cord specifications provided for each country or region.

Table 1: AC Power Cord Specifications

Country/Region

Electrical Specifications

Plug Standards

Shipped Juniper Model Number

Spare Juniper Model Number

Graphic

Australia

250 VAC, 10 A, 50 Hz

AS/NZ 3109-1996

CG_CBL-C13-06-AU

CBL-EX-PWR-C13-AU

China

250 VAC, 10 A, 50 Hz

GB 1002-1996

CG_CBL-C13-06-CH

CBL-EX-PWR-C13-CH

Europe (except Italy, Switzerland, and United Kingdom)

250 VAC, 10 A, 50 Hz

CEE (7) VII

CG_CBL-C13-06-EU

CBL-EX-PWR-C13-EU

Italy

250 VAC, 10 A, 50 Hz

CEI 23-16/VII

CG_CBL-C13-06-IT

CBL-EX-PWR-C13-IT

Japan

125 VAC, 12 A, 50 Hz or 60 Hz

JIS C8303

CG_CBL-C13-06-JP

CBL-EX-PWR-C13-JP

North America

(QFX10002-36Q, QFX10002-72Q only) 125 VAC, 13 A, 60 Hz

(all models) 250 VAC, 13 A, 60 Hz

(all models) 250 VAC, 13 A, 60 Hz

CAN/CSA No. 49-92

NEMA L6-15

NEMA 6-15

CG_CBL-C13-06-US

CBL-EX-PWR-C13-US

CBL-PW-C13-250-US

CBL-PWR-C13-250-US

South Korea

250 VAC, 10 A, 60 Hz

250 VAC, 13 A, 60 Hz

KSC 8305; K60884-1

CG_CBL-C13-06-KR

CBL-EX-PWR-C13-KR

Switzerland

250 VAC, 10 A, 50 Hz

SEV 1011 SEV 1991; EN 60320 C13

CG_CBL-C13-06-SZ

CBL-EX-PWR-C13-SZ

United Kingdom

250 VAC, 10 A, 50 Hz

BS 1363/A

CG_CBL-C13-06-UK

CBL-EX-PWR-C13-UK