Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

TX Matrix General Electrical Safety Guidelines

 
  • Install the router in compliance with the following local, national, or international electrical codes:

    • United States—National Fire Protection Association (NFPA 70), United States National Electrical Code.

    • Canada—Canadian Electrical Code, Part 1, CSA C22.1.

    • Other countries—International Electromechanical Commission (IEC) 60364, Part 1 through Part 7.

    • Evaluated to the TN power system.

  • Locate the emergency power-off switch for the room in which you are working so that if an electrical accident occurs, you can quickly turn off the power.

  • Do not work alone if potentially hazardous conditions exist anywhere in your workspace.

  • Never assume that power is disconnected from a circuit. Always check the circuit before starting to work.

  • Carefully look for possible hazards in your work area, such as moist floors, ungrounded power extension cords, and missing safety grounds.

  • Operate the router within marked electrical ratings and product usage instructions.

  • For the router and peripheral equipment to function safely and correctly, use the cables and connectors specified for the attached peripheral equipment, and make certain they are in good condition.