Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Requirements for Mounting WLC100 Wireless LAN Controllers on a Desk or Wall

    You can mount WLC100 controllers on a desk or wall. When choosing a location, allow at least 6 in. (15.2 cm) of clearance between the front and back of the chassis and adjacent equipment or walls.

    Ensure that the wall on which the controller is mounted is stable and can support the controller.

    If you are mounting the controller in sheetrock (wall board with a gypsum plaster core) or in wall board not backed by wall studs, use hollow wall anchors capable of supporting the weight of the fully loaded chassis. Insert screws into wall studs wherever possible to provide added support for the chassis.

    Published: 2013-09-03