Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Tools and Parts Required for Replacing TX Matrix Components

 

To replace hardware components, you need the tools and parts listed in Table 1.

Table 1: Tools and Parts Required for Component Replacement

Tool or part

Components

7/16-in. (11 mm) nut driver or socket wrench

Power cables

Power supply

Blank panels (if component is not reinstalled)

TX-CB

LCC-CB

Routing Engine

TX-SIB

Dust covers

Fiber-optic array cables

Electrostatic bag or antistatic mat

TX-CB

LCC-CB

Routing Engine

TX-SIB

Electrostatic discharge (ESD) grounding wrist strap

All

Small slotted screwdriver, at least 4 in. long

Fiber-optic array cables

Flat-blade (–) screwdriver, 2.5 mm

Serial cable to AUXILIARY or CONSOLE Routing Engine ports

Phillips (+) screwdriver, number 1

Craft interface

LCC-CB

Phillips (+) screwdriver, number 2

Air filter (front or rear)

Cables and connectors

TX-CB

LCC-CB

TX-CIP

Fan tray (front or rear)

Power supply

Routing Engine

TX-SIB

Wire cutters

Power cables

Power supply