Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Hardware and Software Requirements for a T1600 Line-Card Chassis in a TX Matrix Plus Routing Matrix

 

Hardware and Software Requirements for the TXP-T1600 Configuration

The TXP-T1600 configuration supports one to four T1600 LCCs. Junos OS Release 9.6 and later is required for the TXP-T1600 configuration. For full FPC support, Junos OS Release 10.0 and later is required.

Figure 1 illustrates the rear of a T1600 router with the required hardware for the configuration.

Figure 1: Rear View of the T1600 Router (TXP-T1600 Configuration)
Rear View of the T1600 Router
(TXP-T1600 Configuration)

To integrate a T1600 router into a routing matrix, you must install the following hardware components.

  • Rear fan tray—An upgraded rear fan tray (model number FAN-REAR-TXP-LCC) (part number 760-024613) is required to cool the T1600 LCC for this configuration.

    Note

    Part number 760-009870 is not supported for a T1600 router in a routing matrix.

  • Two LCC-CBs (model number CB-LCC)

    See Line-Card Chassis LCC-CBs.

  • Two C1800 Routing Engines (model numbers RE-DUO-C1800-8G or RE-TXP-DUO-C1800-8G, or RE-DUO-C1800-16G)

    Note

    Both Routing Engines must be the same model number. RE-TXP-DUO-C1800-8G and RE-DUO-C1800-8G are the same Routing Engine.

    See Line-Card Chassis RE-C1800 Routing Engines.

  • Five TXP-T1600 SIBs (model number SIB-TXP-T1600)

    See Line-Card Chassis TXP-T1600 SIBs.

  • If needed, two power supplies

    Note

    You can install any two power supplies that are supported for the T1600 power supply. However, mixing power supplies with different model numbers is not supported, except during upgrade.

    • Three-input 240-A power supplies (model number PWR-T1600-3-80-DC)

      Note

      There are two versions of the three-input 240-A DC power supply with different part numbers. An upgraded three-input 240-A DC power supply (Model number PWR-T1600-3-80-DC-S part number 740-026384) is supported. The three-input 240-A DC power supply (Model number PWR-T1600-3-80-DC-S part number 740-017906) is not supported for a T1600 router in a routing matrix.

    • Four-input 240-A power DC supplies (model number PWR-T1600-4-60-DC)

    • Six-input DC power supplies (model number PWR-T-6-60-DC)

    • Three-phase delta AC power supply (model number PWR-T-10KW-DELTA-AC)

    • Three-phase wye AC power supply (model number PWR-T-10KW-WYE-AC)

The following hardware is not supported for the TXP-T1600 configuration for Junos OS Release 10.0 and earlier releases, If you plan to run a release prior to Junos OS Release 10.0, you must remove the following FPCs and any PICs that require these FPCs prior to integrating the LCC into the routing matrix:

  • All type 1 FPCs

  • All type 2 FPCs

  • T640 Enhanced Scaling FPC4-1P FPCs

Hardware and Software Requirements for a T1600 Router in a TXP-T1600-3D Configuration or TXP-Mixed-LCC-3D Configuration

The TXP-T1600-3D configuration supports up to eight T1600 LCCs. The TXP-Mixed-LCC-3D configuration supports up to six T1600 LCCs.

The following Junos OS releases are required for the TXP-T1600-3D configuration and TXP-Mixed-LCC-3D configuration.

  • Junos OS Release 13.1 and later is required to upgrade the SIBs in an offline LCC.

  • Junos OS Release 13.2 and later is required to upgrade the SIBs in an operational LCC.

Figure 2 illustrates the rear of a T1600 router with the required hardware for the TXP-T1600-3D or TXP-Mixed-LCC-3D configuration.

Figure 2: Rear View of the T1600 Router (TXP-T1600-3D or TXP-Mixed-LCC-3D Configuration)
Rear View of the T1600 Router
(TXP-T1600-3D or TXP-Mixed-LCC-3D Configuration)

Before you integrate a T1600 router into a routing matrix with the TXP-T1600-3D or TXP-Mixed-LCC-3D hardware configuration, the following hardware components are required.

Before you integrate a T1600 router into a routing matrix with the TXP-T1600-3D or TXP-Mixed-LCC-3D configuration, you must remove the following FPCs and any PICs that require these FPCs:

  • T640-FPC1-E and T640-FPC1-E2

  • T640-FPC2, T640-FPC2-E, and T640-FPC2-E2

  • T640-FPC3, T640-FPC3-E, and T640-FPC3-E2