Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Tools and Parts Required for Connecting the TX Matrix Plus Router to Power

    To connect the TX Matrix Plus router to power, you need the following tools:

    • 7/16-in. (11 mm) nut driver, with a minimum of 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts to terminal studs on each power supply.

      Caution: You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and power supply. The maximum torque that may be applied to this nut is 25 in-lb (2.8 Nm).

    • Phillips (+) screwdriver, number 2.

    Published: 2013-05-05