Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services Gateway

 

When planning the installation site for the services gateway, consider the following:

  • The SRX110 Services Gateway requires unrestricted circulation of air to maintain an optimal operating temperature.

    Note

    The SRX110 Services Gateway does not include a fan and uses natural convection cooling.

  • For service personnel to remove and install hardware components, there must be adequate space at the front and back of the device. Allow at least 24 in. (61 cm) both in front of and behind the device.

  • If you are mounting the device in a rack with other equipment, or if you are placing it on the desktop near other equipment, ensure that the exhaust from other equipment does not blow into the intake vents of the chassis.

    Table 1 provides clearance requirements for maintaining optimum airflow and for facilitating maintenance of the device.

    Table 1: Clearance Requirements for the Services Gateway

    Location

    Recommended Clearance

    Requirement for Clearance

    Front of the chassis

    2.5 in. (6.35 cm)

    Space for service personnel to remove and install hardware components

    Rear of the chassis

    2.5 in. (6.35 cm)

    Space for service personnel to remove and install hardware components

    Between the front-mounting flange and rack or cabinet edge

    2.5 in. (6.35 cm)

    Space for cable management and organization

    Between the side of the chassis and any non-heat-producing surface such as a wall or cabinet side

    2.5 in. (6.35 cm)

    Space for the cooling system to function properly and to maintain unrestricted airflow around the chassis

    Between the side of the chassis and devices that have fans or blowers

    2.5 in. (6.35 cm)

    Space for the cooling system to function properly and to maintain unrestricted airflow around the chassis