Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Tools and Parts Required to Provide Power to the T4000 Router

 

To connect the router to power, you need the following tools and parts:

  • DC-powered routers: 7/16-in. (11 mm) hexagonal-head external drive nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts to terminal studs on each power supply on a DC-powered router.

  • Torque-controlled tool.

    Caution

    You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and the power supply. The absolute maximum torque that may be applied to this nut is 45 in-lb (5.0 Nm).

  • DC power cables and lugs. See T4000 DC Power Cable and Lugs Specifications.