Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Tools and Parts Required for Replacing T1600 DC Power System Components

 

To replace a DC power supply, you need the following tools and equipment:

  • Phillips (+) screwdriver, number 2

  • ESD wrist strap with cable

  • 7/16-in. (11 mm) nut driver

    Caution

    You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and the power supply. The absolute maximum torque that may be applied to this nut is 45 lb-in. (5.0 Nm).

  • Wire cutters

  • Flashlight

  • Flat-blade (–) screwdriver

Related Documentation