Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Cabinet Requirements for OCX1100 Switches

    You can mount the switch in a cabinet that contains a 19-in. rack.

    Cabinet requirements consist of:

    • Cabinet size
    • Clearance requirements
    • Cabinet airflow requirements

    Table 1 provides the cabinet requirements and specifications for the switch.

    Table 1: Cabinet Requirements and Specifications for the Switch

    Cabinet Requirement

    Guidelines

    Cabinet size

    • You can mount the switch in a cabinet that contains a 19-in. rack as defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310–D) published by the Electronics Industry Association (http://www.ecianow.org/standards-practices/standards/) .
    • The minimum cabinet size must be able to accommodate the maximum external dimensions of the switch.

    Cabinet clearance

    • The outer edges of the mounting brackets extend the width of the chassis to 19 in. (48.2 cm).
    • The minimum total clearance inside the cabinet is 30 in. (76.2 cm) between the inside of the front door and the inside of the rear door.

    Cabinet airflow requirements

    When you mount the switch in a cabinet, ensure that ventilation through the cabinet is sufficient to prevent overheating.

    • Ensure adequate cool air supply to dissipate the thermal output of the switch or switches.
    • Ensure that the hot air exhaust of the chassis exits the cabinet without recirculating into the switch. An open cabinet (without a top or doors) that employs hot air exhaust extraction from the top ensures the best airflow through the chassis. If the cabinet contains a top or doors, perforations in these elements assist with removing the hot air exhaust.
    • Install the switch in the cabinet in a way that maximizes the open space on the side of the chassis that has the hot air exhaust.
    • Route and dress all cables to minimize the blockage of airflow to and from the chassis.
    • Ensure that the spacing of rails and adjacent cabinets is such that there is proper clearance around the switch and cabinet.
    • A cabinet larger than the minimum required provides better airflow and reduces the chance of overheating.

    Modified: 2015-05-27