Tools and Parts Required for Connecting the JCS 1200 Platform
To connect the JCS 1200 platform to T-series routing platforms, power, and management devices and to power on the platform, you need the following tools and parts:
- 10-mm. hexagonal-head external drive socket wrench, or nut driver, with torque at 13.3 lb-in. (1.5 Nm), for tightening nuts to terminal
studs on each power supply on a DC-powered platform.
Caution: Do not substitute a nonmetric nut driver or wrench. A tool that does not fit the nuts exactly can damage them. If a 10-mm. tool is not available, use pliers or an adjustable wrench.
- Wire cutters
- Electrostatic discharge (ESD) grounding wrist strap