Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Tools and Parts Required for Connecting the JCS1200 Platform

    To connect the JCS1200 platform to T Series routers, power, and management devices and to power on the platform, you need the following tools and parts:

    • 2.5-mm Phillips (+) screwdriver
    • 7/16-in. hexagonal-head external drive socket wrench, or nut driver, with a torque range between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm), for tightening nuts to terminal studs on each power supply on a DC-powered router.

      Caution: Do not substitute a nonmetric nut driver or wrench. A tool that does not fit the nuts exactly can damage them. If a 10-mm. tool is not available, use pliers or an adjustable wrench.

    • Wire cutters
    • Pliers
    • Electrostatic discharge (ESD) grounding wrist strap

    Published: 2013-01-30