Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


T320 Clearance Requirements for Airflow and Hardware Maintenance


When planning the installation site, you must allow sufficient clearance around the rack (see Figure 1):

  • For the cooling system to function properly, the airflow around the chassis must be unrestricted. Airflow through the T320 Chassis depicts the airflow in the router.


    If you mount the router in a cabinet, be sure that ventilation is sufficient to prevent overheating.

  • For service personnel to remove and install hardware components, there must be adequate space at the front and back of the router. At least 24 in. (61 cm) is required both in front of and behind the router. NEBS GR-63 recommends that you allow at least 30 in. (72.6 cm) in front of the rack.

Figure 1: T320 Chassis Dimensions and Clearance Requirements
T320 Chassis Dimensions and Clearance