Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


SRX3400 Services Gateway Cabinet Size and Clearance Requirements


The minimum size cabinet that can accommodate the services gateway is 27.5 in. (69.8 cm) wide and 31.5 in. (80.0 cm) deep. The cabinet must allow at least 5 in. (13 cm) of clearance on each side of the chassis to allow for cooling air to flow through the vents on each side of the device. A cabinet larger than the minimum requirement provides better airflow and reduces the chance of overheating.

Allow at least 3 in. (7.6 cm) of vertical clearance between the top and bottom of the services gateway and other devices in the cabinet.

The minimum front and rear clearance requirements depend on the mounting configuration you choose. The minimum total clearance inside the cabinet is 30.7 in. (78 cm) between the inside of the front door and the inside of the rear door.

The device has not been tested for NEBS and ETSI compliance when mounted inside an enclosed cabinet. NEBS certification only applies if the device is mounted in a two-post or four-post rack.