T4000 Component Serial Number Locations

Most components have a small serial number ID label attached to the component body. For example, many components have a rectangular serial number label as shown in Figure 1.

Figure 1: Serial Number ID Label 

CIP Serial Number Label

The serial number label is located at the top of the left side of the CIP (see Figure 2).

Figure 2: CIP Serial Number Label

Control Board Serial Number Label

The LCC-CB serial number is located on the lower right side of the control board (see Figure 3).

Figure 3: LCC-CB Serial Number Label

Craft Interface Serial Number Label

Figure 4: Craft Interface Serial Number ID Label

FPC Serial Number Label

• T1600 Type 4 FPCs: located on the lower right side

• T4000 Type 5 FPCs: located on the upper middle.

Figure 5 shows the serial number location for a T1600 Type 4 FPC.

Figure 5: Serial Number Label on a T1600 Type 4 FPC

Figure 6 shows the serial number location for a T4000 Type 5 FPC.

Figure 6: Type 5 FPC Serial Number ID Label

PIC Serial Number Label

The exact location serial number label is different on different PICs, depending on the placement of components on the PIC board. In this example, the serial number label is located on the right side of the PIC (see Figure 7), when the PIC is vertically oriented (as it would be installed in the router).

Figure 7: PIC Serial Number Label

Power Supply Serial Number Label

For the DC power supply, the serial number label is located on the lower left side of the faceplate. (see Figure 8).

Figure 8: DC Power Supply Serial Number Label

Routing Engine Serial Number Label

The serial number label is located on the left side (see Figure 9).

Figure 9: Routing Engine

SCG Serial Number Label

The serial number is located on the top of the SCG, close to the midplane connector (see Figure 10).

Figure 10: SCG Serial Number Label

SIB Serial Number Label

The serial number is located on the right side behind the faceplate (see Figure 11).

Figure 11: SIB Serial Number ID Label