Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

TX Matrix Plus TXP-F13 SIB LEDs

 

The TXP-F13 status LEDs (Figure 1) are located below the ONLINE/OFFLINE buttons. Table 1 describes the functions of these LEDs.

Figure 1: TXP-F13 SIB LEDs
TXP-F13 SIB LEDs

Table 1: TXP-F13 SIB LEDs

Label

Color

State

Description

ACTIVE

Green

On steadily

TXP-F13 SIB is in active mode and actively passing traffic.

Off

TXP-F13 SIB is either offline or not actively passing traffic.

OK

Green

On steadily

TXP-F13 SIB is functioning normally.

Off

TXP-F13 SIB is offline or not seated properly.

FAIL

Red

On steadily

TXP-F13 SIB has failed.

Off

No faults have been detected for the TXP-F13 SIB.

The port LEDs are located next to the ports. Table 2 describes the functions of these LEDs.

Table 2: TXP-F13-SIB Port LEDs

Label

Color

State

Description

LINK

Green

On steadily

The link between the TXP-F13 SIB port and the TXP-T1600 SIB port has been established successfully.

Blinking

The link between the TXP-F13 SIB port and the loopback connector has been established successfully.

Yellow

On steadily

The link is being established.

Blinking

The fiber-optic array might be connected to either the wrong TXP-T1600 SIB port or wrong TXP-FI3 SIBport.

Red

On steadily

The link between the TXP-F13 SIB port and the TXP-T1600 SIB port failed. There might be a hardware problem, or the fiber-optic port or cable might need to be cleaned.

Off

The cable is not connected on both sides, or either the TXP-F13 SIB or TXP-T1600 SIB is powered off.

RxPWR

Green

On steadily

Full optical power is being received.

 

Yellow

On steadily

Diminished optical power is being received. The fiber-optic array or the TXP-F13 port might need cleaning, or the cable might be damaged.

Off

No optical power has been received. The fiber-optic array is not connected to the TXP-FI3 SIB port, or not connected to the TXP-T1600 SIB port. If the cable is connected on both sides, the cable might be cut.