Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

LN2600 Router Status LED

 

The LN2600 router includes LEDs on the front panel to provide status information.

Figure 1: LN2600 Router Front Panel
LN2600 Router Front Panel
  1
USB port
  6
DC power input port A
  2
ACT and Link LEDs
  7
DC power input port B
  3
Ethernet port
  8
Power LED - DC power input B
  4
RJ-45 console port
  9
Status LED port
  5
Power LED - DC power input A
 

Table 1 provides information on the LEDs present on the faceplate of the LN2600 router.

Table 1: LN2600 Router Faceplate LEDs Status

LEDColorMeaning

A

B

Off; No color

Power is off.

Steady green

Ready for operation.

The router is powered on and has a proper power supply.

LINK

Off; No color

No link on associated port.

Steady green

On; link established.

ACT

Off; No color

No activity.

Blinking green

Traffic activity.

On initial power-on, the components of the router run boot code, go through a series of self-diagnostic tests, and synchronize with each other. When the tests are complete, use the status LED on the router front panel to determine the status of the router.

Table 2 provides information about the status LED located on the top cable cover of the LN2600 router. LN2600 Rugged Security Router shows the position of the status LED on the LN2600 router.

Table 2: LN2600 Router Status LED

Status LED ColorMeaning

Off; No color

Power is off.

Steady red

Error condition.

Steady green

Ready for operation. The router is powered on and has successfully booted and run SPOST and POST diagnostics.

Blinking green

Powering on and then running SPOST and POST diagnostics, or running individual diagnostics, or performing an upgrade.

Note

The status LED on Initial power-on may briefly flash red color while running the diagnostic tests.