Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

PTX10K-LC1201-36CD Line Card

 
Figure 1: PTX10K-LC1201-36CD Port Panel
PTX10K-LC1201-36CD Port
Panel
  1
36 ports of 400GbE (QSFP56-DD)
  2
PWR LED, STS LED, and OFF reset button

Table 1: PTX10K-LC1201-36CD Summary

Software release

Junos OS Evolved for PTX Series Release 20.3R1

Description

  • Weight: 31 lb (14.06 Kg)

  • Model number: PTX10K-LC1201-36CD

  • Name in the CLI: PTX10K-LC1201

  • Number of ports: 36

Prerequisites

For PTX10008 running Junos OS Evolved:

  • Switch fabric: JNP10008-SF3

  • RCB: JNP10K-RE1-E or JNP10K-RE1-128G-E

  • Fan tray: JNP10008-FAN2

  • Fan tray controller: JNP10008-FTC2

  • Power supplies: JNP10K-PWR-AC2 or JNP10K-PWR-DC2

For PTX10004 running Junos OS Evolved:

  • Switch fabric: JNP10004-SF3

  • RCB: JNP10K-RE1-E or JNP10K-RE1-128G-E

  • Fan tray: JNP10004-FAN2

  • Fan tray controller: JNP10004-FTC2

  • Power supply: JNP10K-PWR-AC2 or JNP10K-PWR-DC2

Hardware features

  • Line-rate throughput of up to 14.4 Tbps on PTX10008 and PTX10004 routers

  • Juniper custom silicon ASICs for increased scaling of bandwidth, subscribers, and services

  • You can channelize the ports using breakout cables to speeds of 200-Gbps, 100-Gbps, 50-Gbps, 25-Gbps, or 10-Gbps.

Software features

Inline Media Access Control Security (MACsec) on all ports

Power requirements

At 25° C, 1600 W

At 55° C, 1775 W

LEDs

Network LEDs

Each network port has a single tricolored LED that indicates link activity and status. The red, amber, or green LED has different interpretations depending on whether the port is channelized, not channelized, or whether the beacon is activated. If the beacon feature is activated on the port, the port blinks.

Nonchannelized:

  • Unlit, off: A transceiver is not present in the port or the link is down because of a loss of signal.

  • Green, on steadily: A link is established.

  • Amber, on steadily: The link is down because of a remote error or because the port was disabled through the CLI.

  • Red, on steadily: The port has a hardware failure.

Channelized:

  • Unlit, off: All channels are down because of loss of signal.

  • Green, on steadily: A link is established and all channels are up.

  • Amber, on steadily: Applies to all other cases.

  • Red, on steadily: The link is down because of a hardware failure or a local error.

Line Card Status LEDs

Power PWR bi-color red/green LED:

  • Unlit, off: Power is not present.

  • Green, on steadily: The line card has power and is operating correctly.

  • Red, on steadily: The line card has a fault condition.

Status STS bi-color red/green LED:

  • Unlit, off: The line card is disabled or offline.

  • Green, on steadily: The line card has power and is operating correctly.

  • Green, blinking: Either the line card is booting or beacon is active.

  • Red, on steadily: The line card has a fault condition.

  • Red, blinking: Beacon is active.

Cables and connectors

You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

The list of supported transceivers for the PTX Series is located at PTX Series Supported Transceivers.

Serial Number Location

The serial number ID label for a line card is located on the connector end of the card. See Figure 2.

Figure 2: Line Card Serial Number Location
Line Card Serial Number
Location