Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

MultiServices PICs (T4000 Router)

 
Figure 1: MultiServices 400 PIC
MultiServices 400 PIC
Figure 2: MultiServices 500 PIC
MultiServices 500 PIC

Software Release

  • MultiServices 400: Junos OS Release 12.2R1 and later (Type 2)

  • MultiServices 500: Junos OS Release 12.1R2 and later (Type 3)

For information on which FPCs support this PIC, see T4000 PIC/FPC Compatibility.

Hardware Features

  • Individual licenses must be purchased for services.

  • Power requirement:

    • Multiservices 400: 0.69 A @ 48 V (33 W)

    • Multiservices 500: 0.83 A @ 48 V (40 W)

  • Model number for Multiservices 400 PIC: PB-MS-400-2

  • Model number for Multiservices 500 PIC: PB-MS-500-3

  • Multiservices 400: up to 3.2 million flows

  • Multiservices 500: up to 3.2 million flows

Software Features

  • Support for up to 2000 service sets

  • Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces

Depending on your Junos OS Release and individual licenses, software features for this PIC can include the features listed in Table 1. For more information about the software features available for services PICs, see the Junos OS Services Interfaces Library for Routing Devices.

Table 1: MultiServices PICs Software Features Supported on the T4000 Router

GRE Key

GRE dont-fragment

Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks

Network Address Translation (NAT) for IP addresses

Port Address Translation (PAT) for port numbers

IP Security (IPSec) encryption

Flow aggregation

12.1R2

Active flow monitoring exports cflowd version 5 and version 8 records

12.1R2

Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954

12.1R2

Passive flow monitoring

12.2

Passive flow collection

12.2

Flow-tap

Dynamic flow capture

12.2

Real-time performance monitoring

Link Services

Traffic sampling

12.1R2

Tunnel services:

  • IP-IP unicast tunneling

  • GRE unicast tunneling—Supports GRE fragmentation

  • Protocol Independent Multicast (PIM) sparse mode unicast tunneling

Virtual tunnel interface for Layer 3 VPNs

Layer 2 Tunneling Protocol (L2TP)

Voice services:

  • Compressed Real-Time Transport Protocol (CRTP)

Encapsulations:

  • Multilink Frame Relay (MLFR)

  • Multilink Point-to-Point Protocol (MLPP)

LEDs

Table 2: MultiServices PIC LEDs

Label

Color

State

Description

PIC STATUS LED, one tricolor

Off

PIC is offline and it is safe to remove it from the chassis.

Green

On steadily

PIC is operating normally.

Yellow

On steadily

PIC is initializing.

Red

On steadily

PIC has an error or failure and no further harm can be done by removing it from the chassis.

Application APP STATUS LED, one bicolor

Off

Service is not running.

Green

On steadily

Service is running under acceptable load.

Yellow

On steadily

Service is overloaded.